Stainless Steel Drainage Channels — Direct From the Manufacturer

The core PRD drainage channel — 200 mm wide, AISI 304 or 316, with a built-in 0.9° slope toward a DN150 outlet. Custom length to order.

200 mm wide drainage channel with a side (offset) DN150 outlet. Used where a centred outlet conflicts with floor structure. Custom length to order.

200 × 200 mm square stainless steel point drain with DN150 outlet. Suits tiled floors and pool surrounds where a compact single drain is preferred over a linear channel.

200 mm wide channel with two DN150 outlets — one at each end. Drains from the centre outward in both directions. Used in long runs where a single end outlet is insufficient.

Compact 120 × 22 mm stainless steel drainage channel with a left-side outlet. Designed for tight spaces where the standard 200 mm width cannot fit.

Compact 120 × 22 mm stainless steel drainage channel with a right-side outlet. Same body as the left-outlet variant — choose based on your pipe connection side.

Drainage channel with the outlet exiting through the rear wall of the body rather than the end or side. Used when the drain pipe runs behind a wall or the floor screed depth is too shallow for a bottom outlet.

T-shaped stainless steel drainage channel — a main run with one perpendicular branch. Used where two drain lines must merge into a single outlet. All arm lengths custom to order.

T-shaped drainage channel with a different junction geometry to Type 1. Suitable for specific floor layouts where the branch angle or body depth differs from the standard T configuration.

T-shaped drainage channel, Type 3 configuration. Contact PRD with your floor plan or drawing for the best fit within the T-channel range.

T-shaped drainage channel, Type 4 configuration. Contact PRD with your floor plan or drawing for the best fit within the T-channel range.

T-shaped drainage channel, Type 5 configuration — the most complex in the T-channel range. Contact PRD with a drawing for accurate specification.

Freestanding stainless steel bottle-profile drainage channel. The bottle cross-section provides a larger water volume capacity than a standard channel of the same floor width. Custom length to order.

Wall-mounted bottle-profile drainage channel with a centre outlet position. Fixed directly to the wall; the bottle body hangs clear of the floor. Custom length to order.

Wall-mounted bottle-profile drainage channel with the outlet positioned on the right end. Choose left or right based on which side your drain pipe exits.

Wall-mounted bottle-profile drainage channel with the outlet positioned on the left end. Mirror of the right-outlet variant — choose based on pipe exit side.

Invisible-drain tile channel: the grating recess accepts a standard floor tile, making the drain disappear into the floor. For premium residential, hotel, and showroom installations where drain visibility is undesirable.

Tile-inlay drainage channel, variant No. 2 — a different body profile or recess geometry to the standard tile channel. Contact PRD to compare variants for your specific tile and floor build-up.

Tile-inlay invisible drainage channel with the outlet on the left end. Select left or right based on your pipe run direction.

Tile-inlay invisible drainage channel with the outlet on the right end. Mirror of the left-outlet variant.

Tile-inlay invisible drainage channel with an offset (side) outlet. Used where the drain pipe exits through the side wall rather than the end of the channel run.

Replacement stainless steel gratings for PRD drainage channels and compatible third-party channels. Ordered by channel width and length. AISI 304 or 316.